ANKER A1367 15w 2-Port 20000mAh POWER BANK

1. **Charging the Power Bank**:

– Connect the provided charging cable to the input port on the power bank.
– Plug the other end of the cable into a USB power source, such as a wall adapter or a computer USB port.
– The LED indicators on the power bank will illuminate to indicate the charging status. When all LED indicators are solid, the power bank is fully charged.

2. **Checking the Power Level**:
– Press the power button on the power bank to check the remaining power level.
– The LED indicators will light up to indicate the remaining charge. Each LED represents approximately 25% of the power capacity.

3. **Charging Devices**:
– Connect your device(s) to the power bank using their respective charging cables.
– Ensure that the power bank is powered on by pressing the power button if necessary.
– The power bank automatically detects your device and begins charging.

4. **Simultaneous Charging**:
– This power bank features two USB output ports, allowing you to charge two devices simultaneously.
– Connect each device to a separate USB port on the power bank using their charging cables.

5. **Powering Off**:
– To power off the power bank, simply disconnect all connected devices.
– If the power bank is not in use, it will automatically power off after a period of inactivity to conserve energy.
– If you wish to manually turn off the power bank, press and hold the power button until the LED indicators turn off.