أدوات الموسيقى

• 4 Mic & 1 Aux Input.
• Built-in MP3 player with USB reader and remote control.
• Bluetooth facility.
• Line Output for connecting to a Booster Amplifier.
• Cut and Boost type Bass & Treble controls.
• Instant transfer to DC Power (Car Battery) if
• AC power fails.

• 3 Mic & 1 Aux Input.
• Built-in MP3 player with USB reader and remote control.
• Bluetooth facility.
• Line Output for connecting to a Booster Amplifier.
• Cut and Boost type Bass & Treble controls.
• Instant transfer to DC Power (Car Battery) if AC power fails.

• 6 Mic & 2 Aux Inputs.
• Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme.
• Line Input for connecting the output from any external mixer or permitting SSA-250 to be used as a Booster Power Amplifier.
• Resettable circuit breaker for protection against overload and short circuit.
• Instant transfer to DC power (Car Battery) if AC power fails.
• Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units.

• 5 Mic & 2 Aux Inputs.
• Line Ouput for connecting to a Booster Amplifier and Preamplifier Output for recording the programme.
• Cut type Bass & Treble controls.
• Instant transfer to DC power (Car Battery) if AC power fails.

• 4 Mic & 1 Aux Inputs.
• Preamplifier Output for connecting to a Booster Amplifier and for recording the programme.
• Instant transfer to DC power (Car Battery) if AC power fails.
• Cut type Bass & Treble Controls.

• 3 Mic & 1 Aux Inputs.
• Preamplifier Output for connecting to a Booster Amplifier and for recording the programme.
• Instant transfer to DC power (Car Battery) if AC power fails.
• Cut type Bass & Treble Controls.

1. Multiple inputs for 2 Mikes/ 1 Aux source.
2. In built Bluetooth facility.
   
3. Cut type bass and treble control.
4. In built Bluetooth facility.
5. Line output provided at rear panel to connect it with booster amplifier.
6. External Speaker connection are provided for 4,8,16 Ohms and 70V and 100 V line.

1. Multiple inputs for 6 Mikes/ 2 Aux source.
2. Pre amplifier out for connecting to a booster amplifier and for recording the programe.
3. Passive bass and treble control
4. In built Bluetooth facility.
5. Led Array for output level.
6. External Speaker connection are provided for 4,8,16 Ohms and 70V and 100 V line.

1. 19″ racks mountable sturdy chasis in 2U height.
2. Uses toshiba 5200 transistor.
   
3. Multiple inputs for 5 Mikes/ 2 Aux source.
4. In built Bluetooth facility.
5. Active bass & Treble control.
6. Preamplifier and line out for connecting to a booster amplifier and for recording the programme.
   
7. Led Array for output level.
8. External Speaker connection are provided for 4,8,16 Ohms and 70V and 100 V line

Power-Mixer-Amplifier:High

1. Multiplue inuts for 6 Mics / 2 Aux source.
2. Stereo/mono selector switch for DJ / PA Programmes.
3. In-Built Bluetooth facility.
4. Separate line in and line out are provided for each zones.
5. Separate monitors are provided for each zone to monitor the output level of each zone.
   
6. It Permits connecting 100 v (LMT) type speakers to one zone low impedance type speakers to another zone without causing overloading and heating.
7. Zone on / off facility. Output levels of each zones can be set independently to desired levels and the zones can be switched on/off without disturbing the volume.
8. Line input for connecting the output from any external mixer.

Multiple inputs for 6 Mics / 2 Aux source.

In-built Bluetooth facility.

It permits connecting 100 V (LMT) type speakers to one zone and low impedance

type speakers to other zone without causing over loading and over heating. Both

the zones can also be connected with 100 V Line type speakers or low impedance

type speakers simultaneously.

Cut type bass and treble control.

Zone on/off facility. Output levels of each zone can be set independently to desired

levels and the zones can be switched on/off without disturbing the volume.

Echo facility inbuilt.

ModelDenson 40U
Weight5.500 Kg.
Frequency Response100-15000 Hz +- 3dB
Power RequirementsAC 220 – 240 V 50/60 Hz | DC 12V (Dry cells UM-1)
Power Output40 W (Max)
Input Channels3 Mikes | 1 Aux | 1 USB Port | 1 SD / MMC Card Reader
Tone ControlBass : – +_10dB at 100 Hz Treble : – +_10dB at 10K Hz
Signal To Noise Ratio60 dB
Output Tags For4 – 8-16 Ohms each zone
Speaker Matching100V Line

1. Multiple inputs for 3 Mixes/ 1 Aux source.
2. Cut type tone control.
   
3. Dry battery on/off switch in UTR -30.
4. portable and ideal for use in electricity failure prone areas.
5. External speaker connections are provided for 4,8,16 Ohms and 100V line.
6. Multi power source amplifier: AC mains, 12V DC (Car battery) and 12V DC (8 x 1.5 v UM-1 cell).