Music

• 6 Mic & 2 Aux Inputs.
• Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme.
• Line Input for connecting the output from any external mixer or permitting SSA-250 to be used as a Booster Power Amplifier.
• Resettable circuit breaker for protection against overload and short circuit.
• Instant transfer to DC power (Car Battery) if AC power fails.
• Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units.

• 5 Mic & 2 Aux Inputs.
• Line Ouput for connecting to a Booster Amplifier and Preamplifier Output for recording the programme.
• Cut type Bass & Treble controls.
• Instant transfer to DC power (Car Battery) if AC power fails.

• 4 Mic & 1 Aux Inputs.
• Preamplifier Output for connecting to a Booster Amplifier and for recording the programme.
• Instant transfer to DC power (Car Battery) if AC power fails.
• Cut type Bass & Treble Controls.

• 3 Mic & 1 Aux Inputs.
• Preamplifier Output for connecting to a Booster Amplifier and for recording the programme.
• Instant transfer to DC power (Car Battery) if AC power fails.
• Cut type Bass & Treble Controls.

1. 19″ racks mountable sturdy chasis in 2U height.
2. Uses toshiba 5200 transistor.
   
3. Multiple inputs for 5 Mikes/ 2 Aux source.
4. In built Bluetooth facility.
5. Active bass & Treble control.
6. Preamplifier  for connecting to a booster amplifier and for recording the programme.
   
7. Led Array for output level.
8. External Speaker connection are provided for 4,8,16 Ohms and 70V and 100 V line

1. Multiple inputs for 7 Mikes/ 2 Aux source.
2. Indvidual volume control for each input
3. Provided with fans to keep the amplifier cool enabling trouble free operations under extreme climate conditions.
   
4. Active bass & Treble control.
5. Led Array for output level.
6. In built Bluetooth facility.
7. Booster amplifier can be connected through line out and preamp output provided at the rear panel.
8. External Speaker connection are provided for 2,4,8 Ohms and 70V and 100 V line.
9. Line input for connecting the output from any external mixer.
   

1. Multiple inputs for 6 Mikes/ 2 Aux source.
2. Preamplifier and line out for connecting to a booster amplifier and for recording the programme.
3. Passive bass and treble control.
   
4. In built Bluetooth facility.
5. Led Array for output level.
6. External Speaker connection are provided for 4,8.16 Ohms and 70V and 100 V line.

ModelDenson 200U
Weight16.000 Kg.
Frequency Response50-15000 Hz +- 3dB
Power RequirementsAC 220 – 240 V 50/60 Hz | DC 24V ( 2 X 12 V Car Battery )
Power Output200 W (Max)
Input Channels6 Mikes | 2 Aux | 1 USB Port | 1 SD / MMC Card Reader
Tone ControlBass : – +_10dB at 100 Hz | Treble : – +_10 db at10 Khz
Pre-amp, Output200mV/600 Ohms
Signal To Noise Ratio60 dB
Output Tags For4 – 8-16 Ohms each zone
Speaker Matching70V-100V Line

• 60 W rated output
• User-friendly front panel allows easy operation
• Excellent frequency response
• 3 electronically balanced microphone inputs, 2 AUX inputs and recording output
• Phantom power is provided to MIC 1, for supplying power to a condenser microphone
• Wide tone-control adjustment range of ±10dB for both bass and treble
• 100 V / 70 V line or 4 Ω speaker outputs
• Recording output
• 3 MIC inputs, 2 AUX inputs for tuner, cassette player or other BGM sources
• 2-unit size