NOVA Electronic Steam Press 32" NI-1173SPD

1. Preparation:

- Place the NOVA Electronic Steam Press 32" NI-1173SPD on a sturdy and flat surface near a power outlet.
- Fill the water reservoir with clean water according to the instructions provided in the user manual. Make sure not to overfill it.

2. Power On:
- Plug the power cord into a suitable power outlet.
- Press the power button to turn on the steam press. Wait for it to heat up to the desired temperature, which is indicated by the ready light.

3. Select Fabric Settings:
- Choose the appropriate temperature and steam settings for the fabric you will be pressing. The NOVA Electronic Steam Press 32" NI-1173SPD typically comes with temperature and steam adjustment controls.
- Refer to the user manual for guidance on the recommended settings for different fabric types.

4. Place Fabric:
- Open the press and lay the fabric flat on the pressing surface. Make sure it is positioned evenly and without any wrinkles.
- Lower the pressing plate onto the fabric using the handle or lever provided. Apply gentle pressure to ensure even ironing.

5. Press and Steam:
- Press the steam burst button if necessary to release steam for stubborn wrinkles.
- Hold the pressing plate down for a few seconds to allow the heat and steam to penetrate the fabric.
- Lift the pressing plate to reveal the freshly pressed fabric. Carefully remove it from the press.

With these five simple steps, you can efficiently use the NOVA Electronic Steam Press 32" NI-1173SPD to achieve professional-quality results with ease.