السوق

1. 19″ racks mountable sturdy chasis in 2U height.
2. Uses toshiba 5200 transistor.
   
3. Multiple inputs for 5 Mikes/ 2 Aux source.
4. In built Bluetooth facility.
5. Active bass & Treble control.
6. Preamplifier  for connecting to a booster amplifier and for recording the programme.
   
7. Led Array for output level.
8. External Speaker connection are provided for 4,8,16 Ohms and 70V and 100 V line

1. 19″ racks mountable sturdy chasis in 2U height.
2. Uses toshiba 5200 transistor.
   
3. Multiple inputs for 5 Mikes/ 2 Aux source.
4. In built Bluetooth facility.
5. Active bass & Treble control.
6. Preamplifier and line out for connecting to a booster amplifier and for recording the programme.
   
7. Led Array for output level.
8. External Speaker connection are provided for 4,8,16 Ohms and 70V and 100 V line

1. Multiple inputs for 7 Mikes/ 2 Aux source.
2. Indvidual volume control for each input
3. Provided with fans to keep the amplifier cool enabling trouble free operations under extreme climate conditions.
   
4. Active bass & Treble control.
5. Led Array for output level.
6. In built Bluetooth facility.
7. Booster amplifier can be connected through line out and preamp output provided at the rear panel.
8. External Speaker connection are provided for 2,4,8 Ohms and 70V and 100 V line.
9. Line input for connecting the output from any external mixer.
   

1. Multiplue inuts for 6 Mics / 2 Aux source.
2. Stereo/mono selector switch for DJ / PA Programmes.
3. In-Built Bluetooth facility.
4. Separate line in and line out are provided for each zones.
5. Separate monitors are provided for each zone to monitor the output level of each zone.
   
6. It Permits connecting 100 v (LMT) type speakers to one zone low impedance type speakers to another zone without causing overloading and heating.
7. Zone on / off facility. Output levels of each zones can be set independently to desired levels and the zones can be switched on/off without disturbing the volume.
8. Line input for connecting the output from any external mixer.

ModelDenson 200U
Weight16.000 Kg.
Frequency Response50-15000 Hz +- 3dB
Power RequirementsAC 220 – 240 V 50/60 Hz | DC 24V ( 2 X 12 V Car Battery )
Power Output200 W (Max)
Input Channels6 Mikes | 2 Aux | 1 USB Port | 1 SD / MMC Card Reader
Tone ControlBass : – +_10dB at 100 Hz | Treble : – +_10 db at10 Khz
Pre-amp, Output200mV/600 Ohms
Signal To Noise Ratio60 dB
Output Tags For4 – 8-16 Ohms each zone
Speaker Matching70V-100V Line

ModelDenson 40U
Weight5.500 Kg.
Frequency Response100-15000 Hz +- 3dB
Power RequirementsAC 220 – 240 V 50/60 Hz | DC 12V (Dry cells UM-1)
Power Output40 W (Max)
Input Channels3 Mikes | 1 Aux | 1 USB Port | 1 SD / MMC Card Reader
Tone ControlBass : – +_10dB at 100 Hz Treble : – +_10dB at 10K Hz
Signal To Noise Ratio60 dB
Output Tags For4 – 8-16 Ohms each zone
Speaker Matching100V Line